This is a 4-inch Square Raised Cover (Mud Ring / Plaster Ring) for standard 4" square electrical device boxes. It raises the flush of the box to match finished wall depth (plasterboard / drywall thickness), so your switch, socket or device strap sits perfectly flush with the wall surface.
Product Features And Advantage:
1. Flush finish guaranteed —— Each ring corresponds to a specific wall thickness, ensuring the panel fits flush without protruding or sinking. Electricians can install it right the first time, saving on rework.
2. 4-tab design locks onto box ears —— The four corner tabs snap directly onto the square box, eliminating the need for additional brackets. One person can install one in 30 seconds.
3. Knockout-free, device-ready —— The inner edge features 4 holes and 2 slots that align directly with US-standard switch and outlet frames, eliminating the need for on-site drilling.
4. Galvanized, rust-resistant —— With a galvanized coating of 8–12 μm, these panels are suitable for use in damp basements and walls adjacent to bathrooms.
5. Stackable — Stack two rings together when deeper wall installation is required, corresponding to 1“ and 1-1/2” depths, eliminating the need to stock too many SKUs.
6.We manufacture in China-Price Advantage.
FAQ: Q1: Is this UL listed? A1: Yes, we ship with UL/cULus steel mark on the part; UL file number can be quoted upon request.
Q2: What wall thickness does it fit? A2: Standard version is 1/2″ raise. We also make 5/8″ and 3/4″. Tell me your drywall + plaster thickness, I’ll recommend.
Q3: Can we use it for UK/EU boxes? A3: This one is for NEMA 4″ square box (US/Canada). If your project uses BS 5-gang or Pattress boxes, we have a parallel range — send me your drawing, we can tool up.
Send us a message and we'll get back to you as quickly as possible.
We Value Your Privacy
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking "Accept", you consent to our use of cookies.