Estándar: DIN 933, ISO 4017, DIN 961, ISO 8676, DIN558Tamaño: M3 - M52 Longitud 6 - 200MMMATERIAL: Acero al carbono, Acero inoxidable, GRADO DE BRASSGRADE: 4.8 5.8 6.8 8 10.9 12.9 A2-50 A2-70 A4-70 A4-80FINISH: SELF COLOR, Zinc Plated, HDG
STANDARD: DIN985SIZE: M3 - M48MATERIAL: Acero al carbono, Acero inoxidableGRADO: 6, 8, 10 (Acero al carbono) A2-50, A2-70, A4-70, A4-80 (Acero inoxidable) ACHADO: Plain | BZP | Galvanizado mecánico | GEOMET. ..EMBATAJE: Embalaje a granel Pequeño en caja o personalizadoAPLICACIÓN: Maquinaria, Industria química, EdificioEstilo de cabeza: Hexagonal
Estándar: DIN 934TAMAÑO: M2.5 - M100MATERIAL: ACERO GRADO 8, 10, 12GRADO: 6, 8, 10, 12, A2, A4, BRASSFINISH: PLANO | BZP | HDG | GEOMET. ..EMBALLAJE: ENBALLADO A MASSA GRESA | Pequeña caja
Tipo de producto: Self Drilling Screw
Tipo de cabeza: Wafer/Truss Head
Tamaño : ST4.2, ST4.8, ST5.5, ST6.3,available in a full range of lengths and customizable
Material : Acero al carbono, acero inoxidable
Finalizar : Zinc Plated (Blue-White, Yellow),Custom
Tipo de accionamiento: Phillips, Personalizado
1.Large bearing surface to avoid crushing or denting thin sheets
The head diameter is much larger than that of pan head screws of the same size, functioning like an integrated flat washer. When fastening color steel sheets, thin aluminum panels, light steel sheets and thin iron sheets, pressure is evenly distributed to avoid dimpling, tearing or warping of the substrate.
2.Phillips drive for fast installation with electric screwdrivers
Low-profile head to reduce interference and scratching The head height is much lower than a pan head. It sits flush against the profile surface. When installed under insulation, overlapping panels or edge trims, it will not puncture surface layers or scratch waterproof membranes.
3.Cost-effective
For the same material and size, wafer head screws are cheaper than hex flange self-drilling screws, ideal for high-volume non-load-bearing enclosure applications.
4.In addition to the wafer head self tapping screw, self-tapping screws are also available with pan heads, countersunk heads, and hex flange heads, and are compatible with modular cabinets.
Preguntas frecuentes:
Q：Can this screw drill thick steel directly?
A：Standard type works for steel sheet up to 2.5mm. Choose heavy-duty longer self-drilling screws for thicker metal.
Q：Are different lengths and diameters available?
A：Yes, abundant standard sizes in stock, non-standard sizes can be customized.
Envíenos un mensaje y nos pondremos en contacto con usted lo antes posible.
Chat ahora
Consulte los precios
